Publications

A non-dimensional time-domain lumped model for externally DC biased capacitive microphones with two electrodes

Printezis, Georgios ; Aage, Niels ; Lucklum, Frieder
in: Applied Acoustics, vol: 216

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1016/j.apacoust.2023.109758

Efficient Inverse-designed Structural Infill for Complex Engineering Structures

Jensen, Peter Dørffler Ladegaard ; Olsen, Tim Felle ; Bærentzen, J. Andreas ; Aage, Niels ; Sigmund, Ole
in: Thin-Walled Structures, vol: 195

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1016/j.tws.2023.111427

Experimental realization of deep sub-wavelength confinement of light in a topology-optimized InP nanocavity

Xiong, Meng ; Christiansen, Rasmus Ellebak ; Schröder, Frederik ; Yu, Yi ; Casses, Laura Nevenka ; Semenova, Elizaveta ; Yvind, Kresten ; Stenger, Nicolas ; Sigmund, Ole ; Mørk, Jesper
in: Optical Materials Express, vol: 14, issue: 2, pages: 397-406

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1364/OME.513625

Inverse design and characterization of compact, broadband, and low-loss chip-scale photonic power splitters

Hansen, Søren Engelberth ; Arregui Bravo, Guillermo ; Babar, Ali Nawaz ; Christiansen, Rasmus Ellebæk ; Stobbe, Søren
in: Materials for Quantum Technology, vol: 4

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1088/2633-4356/ad2521

Phasor Noise for Dehomogenisation in 2D Multiscale Topology Optimisation

Woldseth, Rebekka V. ; Bærentzen, J. Andreas ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 418, Part B

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1016/j.cma.2023.116551

Topology Optimization framework for designing efficient Thermo-Optical Phase Shifters

Jokisch, Benat Martinez de Aguirre ; Christiansen, Rasmus Ellebæk ; Sigmund, Ole
in: Journal of the Optical Society of America B: Optical Physics, vol: 41, issue: 2, pages: A18-A31

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1364/JOSAB.499979

Topology optimization of labyrinth seals using interface identification techniques

Moscatelli, Eduardo ; Andreasen, Casper S. ; Aage, Niels ; Picelli, Renato ; Silva, Emílio C.N.
in: Computer Methods in Applied Mechanics and Engineering, vol: 420

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1016/j.cma.2023.116716

Topology optimization of multi-material active structures to reduce energy consumption and carbon footprint

Wang, Yafeng ; Sigmund, Ole
in: Structural and Multidisciplinary Optimization, vol: 67, issue: 1

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1007/s00158-023-03698-3

Topology optimization of self-contacting structures

Frederiksen, Andreas Henrik ; Sigmund, Ole ; Poulios, Konstantinos
in: Computational Mechanics

Type: Journal article (Peer reviewed)

Status: Accepted/In press | Year: 2024 | DOI: https://doi.org/10.1007/s00466-023-02396-7

Topology optimization of transient vibroacoustic problems for broadband filter design using cut elements

Dilgen, Cetin B. ; Aage, Niels
in: Finite Elements in Analysis and Design

Type: Journal article (Peer reviewed)

Status: Accepted/In press | Year: 2024 | DOI: https://doi.org/10.1016/j.finel.2024.104123

Validation and characterization of algorithms and software for photonics inverse design

Chen, Mo ; Christiansen, Rasmus E. ; Fan, Jonathan A. ; Işiklar, Göktuğ ; Jiang, Jiaqi ; Johnson, Steven G. ; Ma, Wenchao ; Miller, Owen D. ; Oskooi, Ardavan ; Schubert, Martin F. ; Wang, Fengwen ; Williamson, Ian A.D. ; Xue, Wenjin ; Zhou, You
in: Journal of the Optical Society of America B: Optical Physics, vol: 41, issue: 2, pages: A161-A176

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1364/JOSAB.506412

Vibroacoustic topology optimization for sound transmission minimization through sandwich structures

Cool, Vanessa ; Sigmund, Ole ; Aage, Niels ; Naets, Frank ; Deckers, Elke
in: Journal of Sound and Vibration, vol: 568

Type: Journal article (Peer reviewed)

Status: Published | Year: 2024 | DOI: https://doi.org/10.1016/j.jsv.2023.117959

A first-order equivalent static loads algorithm for optimization of nonlinear static response

Stolpe, Mathias ; Pollini, Nicolò
in: Advances in Engineering Software, vol: 182

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.advengsoft.2023.103462

A neighborhood search integer programming approach for wind farm layout optimization

Pérez-Rúa, Juan-Andreas ; Stolpe, Mathias ; Cutululis, Nicolaos Antonio
in: Wind Energy Science, vol: 8, issue: 9, pages: 1453-1473

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.5194/wes-8-1453-2023

A strategy for avoiding spurious localized buckling modes in topology optimization

Ferrari, Federico ; Sigmund, Ole
in: International Journal for Numerical Methods in Engineering, vol: 124, issue: 18, pages: 4118-4140

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1002/nme.7309

Augmented Lagrangian approach for multi-objective topology optimization of energy storage flywheels with local stress constraints

Kale, Vaishnavi ; Aage, Niels ; Secanell, Marc
in: Structural and Multidisciplinary Optimization, vol: 66

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1007/s00158-023-03693-8

Density-Based Topology Optimization in Method of Moments: Q-factor Minimization

Tucek, Jonas ; Capek, Miloslav ; Jelinek, Lukas ; Sigmund, Ole
in: IEEE Transactions on Antennas and Propagation, vol: 71, issue: 12, pages: 9738-9751

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1109/TAP.2023.3321373

Design complexity tradeoffs in topology optimization of forced convection laminar flow heat sinks

Rogié, Brice ; Andreasen, Casper Schousboe
in: Structural and Multidisciplinary Optimization, vol: 66, issue: 1

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1007/s00158-022-03449-w

Designing structures that maximize spatially averaged surface-enhanced Raman spectra

Yao, Wenjie ; Verdugo, Francesc ; Everitt, Henry O. ; Christiansen, Rasmus E. ; Johnson, Steven G.
in: Optics Express, vol: 31, issue: 3, pages: 4964-4977

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1364/OE.472646

Design of hierarchical microstructures with isotropic elastic stiffness

Yu, Xue ; Wang, Fengwen ; Luo, Zhen ; Kang, Zhan ; Wang, Yiqiang
in: Materials and Design, vol: 229

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.matdes.2023.111895

Efficient low-reflection fully etched vertical free-space grating couplers for suspended silicon photonics

Hansen, Søren Engelberth ; Arregui, Guillermo ; Babar, Ali Nawaz ; Albrechtsen, Marcus ; Lahijani, Babak Vosoughi ; Christiansen, Rasmus Ellebæk ; Stobbe, Søren
in: Optics Express, vol: 31, issue: 11, pages: 17424-17436

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1364/OE.485356

Experimental characterization of a shape optimized acoustic lens: Application to compact speakerphone design

Andersen, Peter Risby ; Lee, Gyeong-Tae ; Nielsen, Daniel Gert ; Kook, Junghwan ; Cutanda Henríquez, Vicente ; Aage, Niels ; Park, Yong-Hwa
in: Journal of the Acoustical Society of America, vol: 153, issue: 4, pages: 2351-2361

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1121/10.0017859

Holistic computational design within additive manufacturing through topology optimization combined with multiphysics multi-scale materials and process modelling

Bayat, Mohamad ; Zinovieva, Olga ; Ferrari, Federico ; Ayas, Can ; Langelaar, Matthijs ; Spangenberg, Jon ; Salajeghe, Roozbeh ; Poulios, Konstantinos ; Mohanty, Sankhya ; Sigmund, Ole ; Hattel, Jesper
in: Progress in Materials Science, vol: 138

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.pmatsci.2023.101129

Hybrid achromatic microlenses with high numerical apertures and focusing efficiencies across the visible

Richards, Corey A. ; Ocier, Christian R. ; Xie, Dajie ; Gao, Haibo ; Robertson, Taylor ; Goddard, Lynford L. ; Christiansen, Rasmus E. ; Cahill, David G. ; Braun, Paul V.
in: Nature Communications, vol: 14, issue: 1

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1038/s41467-023-38858-y

Impact of figures of merit in photonic inverse design

Christiansen, Rasmus E. ; Kristensen, Philip Trøst ; Mørk, Jesper ; Sigmund, Ole
in: Optics Express, vol: 31, issue: 5, pages: 8363-8374

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1364/OE.482380

Inverse design of mechanical springs with tailored nonlinear elastic response utilizing internal contact

Bluhm, Gore Lukas ; Sigmund, Ole ; Poulios, Konstantinos
in: International Journal of Non-Linear Mechanics, vol: 157

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.ijnonlinmec.2023.104552

Inverse design of optical mode converters by topology optimization: tutorial

Christiansen, Rasmus Ellebæk
in: Journal of Optics, vol: 25

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1088/2040-8986/acdbdd

Multi-material topology optimization for maximizing structural stability under thermo-mechanical loading

Wang, Yafeng ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 407

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.cma.2023.115938

Non-hierarchical architected materials with extreme stiffness and strength

Wang, Fengwen ; Brøns, Marie ; Sigmund, Ole
in: Advanced Functional Materials, vol: 33, issue: 13

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1002/adfm.202211561

Observation of strong backscattering in valley-Hall photonic topological interface modes

Rosiek, Christian Anker ; Arregui, Guillermo ; Vladimirova, Anastasiia ; Albrechtsen, Marcus ; Vosoughi Lahijani, Babak ; Christiansen, Rasmus Ellebæk ; Stobbe, Søren
in: Nature Photonics, vol: 17, pages: 386-392

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1038/s41566-023-01189-x

Programming and physical realization of extreme three-dimensional responses of metastructures under large deformations

Li, Weichen ; Jia, Yingqi ; Wang, Fengwen ; Sigmund, Ole ; Zhang, Xiaojia Shelly
in: International Journal of Engineering Science, vol: 191

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.ijengsci.2023.103881

Self-bridging metamaterials surpassing the theoretical limit of Poisson's ratios

Zhang, Jinhao ; Xiao, Mi ; Gao, Liang ; Alù, Andrea ; Wang, Fengwen
in: Nature Communications, vol: 14, issue: 1

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1038/s41467-023-39792-9

Simple and efficient GPU accelerated topology optimisation: Codes and applications

Träff, Erik A. ; Rydahl, Anton ; Karlsson, Sven ; Sigmund, Ole ; Aage, Niels
in: Computer Methods in Applied Mechanics and Engineering, vol: 410

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.cma.2023.116043

Simultaneous shape and topology optimization of wings

Høghøj, Lukas C. ; Conlan-Smith, Cian ; Sigmund, Ole ; Andreasen, Casper Schousboe
in: Structural and Multidisciplinary Optimization, vol: 66, issue: 5

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1007/s00158-023-03569-x

Stress constrained topology optimization of energy storage flywheels using a specific energy formulation

Kale, Vaishnavi ; Aage, Niels ; Secanell, Marc
in: Journal of Energy Storage, vol: 61

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.est.2023.106733

Topology optimization for structural mass reduction of direct drive electric machines

Hayes, Austin C. ; Träff, Erik A. ; Sørensen, Christian Vestergaard ; Willems, Sebastian Vedsø ; Aage, Niels ; Sigmund, Ole ; Whiting, Gregory L.
in: Sustainable Energy Technologies and Assessments, vol: 57

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.seta.2023.103254

Topology optimization of multiscale structures considering local and global buckling response

Christensen, Christoffer Fyllgraf ; Wang, Fengwen ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 408

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1016/j.cma.2023.115969

When is DiESL=ESL for linear dynamic response structural optimization?

Stolpe, Mathias
in: Structural and Multidisciplinary Optimization, vol: 66, issue: 4

Type: Journal article (Peer reviewed)

Status: Published | Year: 2023 | DOI: https://doi.org/10.1007/s00158-023-03495-y

3D shape optimization of loudspeaker cabinets for uniform directivity

Andersen, Peter Risby ; Cutanda Henríquez, Vicente ; Aage, Niels ; Kook, Junghwan
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 12

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03451-2

Aerodynamic Shape Optimization of Highly Nonplanar Raised and Drooped Wings

Conlan-Smith, Cian ; Ramos-García, Néstor ; Schousboe Andreasen, Casper
in: Journal of Aircraft, vol: 59, issue: 1, pages: 206-218

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.2514/1.C036403

Aeroelastic shape optimization of solid foam core wings subject to large deformations

Conlan-Smith, Cian ; Andreasen, Casper Schousboe
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 6

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03246-5

An open-source framework for large-scale transient topology optimization using PETSc

Kristiansen, Hansotto ; Aage, Niels
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 10

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03312-y

Buckling and yield strength estimation of architected materials under arbitrary loads

Andersen, Morten N. ; Wang, Yiqiang ; Wang, Fengwen ; Sigmund, Ole
in: International Journal of Solids and Structures, vol: 254-255

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.ijsolstr.2022.111842

De-homogenization of optimal 2D topologies for multiple loading cases

Jensen, Peter Dørffler Ladegaard ; Sigmund, Ole ; Groen, Jeroen P.
in: Computer Methods in Applied Mechanics and Engineering, vol: 399

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.cma.2022.115426

De-homogenization using Convolutional Neural Networks

Elingaard, Martin O. ; Aage, Niels ; Bærentzen, J. Andreas ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 388

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.cma.2021.114197

Digital synthesis of free-form multimaterial structures for realization of arbitrary programmed mechanical responses

Li, Weichen ; Wang, Fengwen ; Sigmund, Ole ; Zhang, Xiaojia Shelly
in: Proceedings of the National Academy of Sciences of the United States of America, vol: 119, issue: 10

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1073/pnas.2120563119

Experimental verification of a novel hierarchical lattice material with superior buckling strength

Bluhm, Gore Lukas ; Christensen, Keld ; Poulios, Konstantinos ; Sigmund, Ole ; Wang, Fengwen
in: APL Materials, vol: 10, issue: 9

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1063/5.0101390

Fail-safe optimization of tubular frame structures under stress and eigenfrequency requirements

Dou, Suguang ; Stolpe, Mathias
in: Computers & Structures, vol: 258

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.compstruc.2021.106684

Including the power regulation strategy in aerodynamic optimization of wind turbines for increased design freedom

Iori, J. ; McWilliam, M. K. ; Stolpe, M.
in: Wind Energy, vol: 25, issue: 10, pages: 1791-1811

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1002/we.2769

Nanometer-scale photon confinement in topology-optimized dielectric cavities

Albrechtsen, Marcus ; Vosoughi Lahijani, Babak ; Christiansen, Rasmus Ellebæk ; Nguyen, Vy Thi Hoang ; Casses, Laura Nevenka ; Hansen, Søren Engelberth ; Stenger, Nicolas ; Sigmund, Ole ; Jansen, Henri ; Mørk, Jesper ; Stobbe, Søren
in: Nature Communications, vol: 13, issue: 1

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1038/s41467-022-33874-w

Numerical study of long-time growth of hydraulic fractures in a line drive

Mogensen, J. L. ; Niordson, C. F. ; Andreasen, C. S. ; Jørgensen, O.
in: Geomechanics for Energy and the Environment, vol: 29

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.gete.2021.100270

On benchmarking and good scientific practise in topology optimization

Sigmund, Ole
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 11

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03427-2

On the trade-off between mode volume and quality factor in dielectric nanocavities optimized for Purcell enhancement

Işiklar, Göktug ; Kristensen, Philip Trøst ; Mørk, Jesper ; Sigmund, Ole ; Christiansen, Rasmus Ellebæk
in: Optics Express, vol: 30, issue: 26, pages: 47304-47314

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1364/OE.474686

On the validity of numerical models for viscothermal losses in structural optimization for micro-acoustics

Andersen, Peter Risby ; Cutanda Henriquez, Vicente ; Aage, Niels
in: Journal of Sound and Vibration, vol: 547

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.jsv.2022.117455

Structural topology optimization with predetermined breaking points

da Silva, Gustavo Assis ; Beck, André Teófilo ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 400

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.cma.2022.115610

Synthesis of Frame Field-Aligned Multi-Laminar Structures

Stutz, Florian Cyril ; Olsen, Tim Felle ; Groen, Jeroen Peter ; Trung, Tuan Nguyen ; Aage, Niels ; Sigmund, Ole ; Solomon, Justin ; Bærentzen, Jakob Andreas
in: A C M Transactions on Graphics, vol: 41, issue: 5

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1145/3516522

Three dimensional vibroacoustic topology optimization of hearing instruments using cut elements

Dilgen, Sumer B. ; Aage, Niels ; Jensen, Jakob S.
in: Journal of Sound and Vibration, vol: 532

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.jsv.2022.116984

Topology optimization guided by a geometrical pattern library

Navez, Tanguy ; Schmidt, Martin-Pierre ; Sigmund, Ole ; Pedersen, Claus B. W.
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 4

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03197-x

Topology optimization of damage‐resistant structures with a predefined load‐bearing capacity

Barbier, Tobias ; Shakour, Emad ; Sigmund, Ole ; Lombaert, Geert ; Schevenels, Mattias
in: International Journal for Numerical Methods in Engineering, vol: 123, issue: 4, pages: 32

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1002/nme.6891

Topology Optimization of Graded Truss Lattices Based on On-the-Fly Homogenization

Telgen, Bastian ; Sigmund, Ole ; Kochmann, Dennis M.
in: Journal of Applied Mechanics, vol: 89, issue: 6

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1115/1.4054186

Topology optimization of MEMS resonators with target eigenfrequencies and modes

Giannini, Daniele ; Aage, Niels ; Braghin, Francesco
in: European Journal of Mechanics, A/Solids, vol: 91

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.euromechsol.2021.104352

Topology optimization of structures with infill-supported enclosed voids for additive manufacturing

Luo, Yunfeng ; Sigmund, Ole ; Li, Quhao ; Liu, Shutian
in: Additive Manufacturing, vol: 55

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1016/j.addma.2022.102795

Toward 3D-Printed Inverse-Designed Metaoptics

Roques-Carmes, Charles ; Lin, Zin ; Christiansen, Rasmus E. ; Salamin, Yannick ; Kooi, Steven E. ; Joannopoulos, John D. ; Johnson, Steven G. ; Soljacic, Marin
in: ACS Photonics, vol: 9, issue: 1, pages: 43-51

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1021/acsphotonics.1c01442

Trace formulation for photonic inverse design with incoherent sources

Yao, Wenjie ; Verdugo, Francesc ; Christiansen, Rasmus E. ; Johnson, Steven G.
in: Structural and Multidisciplinary Optimization, vol: 65, issue: 11

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s00158-022-03389-5

Ultra-broadband edge-state pair for zigzag-interfaced valley Hall insulators

Zhang, Jinhao ; Wang, Fengwen ; Sigmund, Ole ; Gao, Liang ; Christiansen, Rasmus E.
in: Science China: Physics, Mechanics and Astronomy, vol: 65, issue: 5

Type: Journal article (Peer reviewed)

Status: Published | Year: 2022 | DOI: https://doi.org/10.1007/s11433-021-1854-2

3D architected isotropic materials with tunable stiffness and buckling strength

Wang, Fengwen ; Sigmund, O.
in: Journal of the Mechanics and Physics of Solids, vol: 152

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.jmps.2021.104415

Achieving a flat, wideband frequency response of a loudspeaker unit by numerical optimization with requirements on its directivity

Nielsen, Daniel G. ; Agerkvist, Finn T. ; Jensen, Jakob S.
in: Journal of the Acoustical Society of America, vol: 150, issue: 2, pages: 663-672

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1121/10.0005731

A comprehensive review of educational articles on structural and multidisciplinary optimization

Wang, Chao ; Zhao, Zhi ; Zhou, Ming ; Sigmund, Ole ; Zhang, Xiaojia Shelly
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 2827–2880

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-03050-7

Adaptive reduced-order modeling for non-linear fluid–structure interaction

Thari, Ali ; Pasquariello, Vito ; Aage, Niels ; Hickel, Stefan
in: Computers and Fluids, vol: 229

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.compfluid.2021.105099

Aeroelastic optimization of aircraft wings using a coupled three-dimensional panel-beam model

Conlan-Smith, Cian ; Andreasen, Casper Schousboe
in: AIAA Journal, vol: 59, issue: 4, pages: 1374-1386

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.2514/1.J059911

Compact 200 line MATLAB code for inverse design in photonics by topology optimization: tutorial

Christiansen, Rasmus E. ; Sigmund, Ole
in: Journal of the Optical Society of America - B, vol: 38, issue: 2, pages: 510-520

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1364/JOSAB.405955

Complementary lecture notes for teaching the 99/88-line topology optimization codes

Zhou, Ming ; Sigmund, Ole
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 3227–3231

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-03004-z

Computational inverse design for ultra-compact single-piece metalenses free of chromatic and angular aberration

Lin, Zin ; Roques-Carmes, Charles ; Christiansen, Rasmus E. ; Soljačić, Marin ; Johnson, Steven G.
in: Applied Physics Letters, vol: 118, issue: 4

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1063/5.0035419

Design of composite structures with programmable elastic responses under finite deformations

Li, Weichen ; Wang, Fengwen ; Sigmund, Ole ; Shelly Zhang, Xiaojia
in: Journal of the Mechanics and Physics of Solids, vol: 151

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.jmps.2021.104356

Design of metamaterial mechanisms using robust topology optimization and variable linking scheme

Wu, Kai ; Sigmund, Ole ; Du, Jianbin
in: Structural and Multidisciplinary Optimization, vol: 63, pages: 1975–1988

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-020-02791-1

Fictitious domain models for topology optimization of time-harmonic problems

Jensen, Jakob S.
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 871–887

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-02898-z

Generalized shape optimization of transient vibroacoustic problems using cut elements

Dilgen, Cetin Batur ; Aage, Niels
in: International Journal for Numerical Methods in Engineering, vol: 122, pages: 1578-1601

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1002/nme.6591

Generative design of stiffened plates based on homogenization method

Ma, Xiangtao ; Wang, Fayao ; Aage, Niels ; Tian, Kuo ; Hao, Peng ; Wang, Bo
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 3951–3969

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-03070-3

Gradient-based optimization of a 15 MW wind turbine spar floater

Pollini, Nicolò ; Pegalajar-Jurado, Antonio ; Dou, Suguang ; Bredmose, Henrik ; Stolpe, Mathias
in: Journal of Physics: Conference Series, vol: 2018, issue: 1
Presented at: EERA DeepWind’2021 - 18th Deep Sea Offshore Wind R&D Conference

Type: Conference article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1088/1742-6596/2018/1/012032

Internal contact modeling for finite strain topology optimization

Bluhm, Gore Lukas ; Sigmund, Ole ; Poulios, Konstantinos
in: Computational Mechanics, vol: 67, pages: 1099–1114

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00466-021-01974-x

Inverse design in photonics by topology optimization: tutorial

Christiansen, Rasmus E. ; Sigmund, Ole
in: Journal of the Optical Society of America - B, vol: 38, issue: 2, pages: 496-509

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1364/JOSAB.406048

Length scale control for high-resolution three-dimensional level set–based topology optimization

Aage, Niels ; Giele, Reinier ; Andreasen, Casper Schousboe
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 1127–1139

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-02904-4

Local versus global stress constraint strategies in topology optimization: a comparative study

Assis da Silva, Gustavo ; Aage, Niels ; Beck, André Teófilo ; Sigmund, Ole
in: International Journal for Numerical Methods in Engineering, vol: 122, issue: 21, pages: 6003-6036

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1002/nme.6781

Multi-scale topology optimization for stiffness and de-homogenization using implicit geometry modeling

Groen, J. P. ; Thomsen, C. R. ; Sigmund, O.
in: Structural and Multidisciplinary Optimization, vol: 63, pages: 2919–2934

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-02874-7

On approaches for avoiding low-stiffness regions in variable thickness sheet and homogenization-based topology optimization

Giele, Reinier ; Groen, Jeroen ; Aage, Niels ; Andreasen, Casper Schousboe ; Sigmund, Ole
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 39–52

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-02933-z

On stress-constrained fail-safe structural optimization considering partial damage

Dou, Suguang ; Stolpe, Mathias
in: Structural and Multidisciplinary Optimization, vol: 63, pages: 929-933

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-020-02782-2

On the competition for ultimately stiff and strong architected materials

Andersen, Morten N. ; Wang, Fengwen ; Sigmund, Ole
in: Materials and Design, vol: 198

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.matdes.2020.109356

Optimized method for multi-axial fatigue testing of wind turbine blades

Castro, Oscar ; Belloni, Federico ; Stolpe, Mathias ; Yeniceli, Süleyman Cem ; Berring, Peter ; Branner, Kim
in: Composite Structures, vol: 257

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.compstruct.2020.113358

Optimizing a distribution of resonators on a thin plate for the desired sound radiation

Jung, Jaesoon ; Jensen, Jakob S. ; Jeong, Cheol-Ho ; Jeon, Onyu ; Wang, Semyung
in: Journal of Sound and Vibration, vol: 496

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.jsv.2020.115926

Plate microstructures with extreme stiffness for arbitrary multi-loadings

Wang, Yiqiang ; Groen, Jeroen P. ; Sigmund, Ole
in: Computer Methods in Applied Mechanics and Engineering, vol: 381

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.cma.2021.113778

Reduced-order methods for dynamic problems in topology optimization: A comparative study

Li, Quhao ; Sigmund, Ole ; Jensen, Jakob Søndergaard ; Aage, Niels
in: Computer Methods in Applied Mechanics and Engineering, vol: 387

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.cma.2021.114149

Self-supporting structure design with feature-driven optimization approach for additive manufacturing

Zhou, Lu ; Sigmund, Ole ; Zhang, Weihong
in: Computer Methods in Applied Mechanics and Engineering, vol: 386

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.cma.2021.114110

Shape optimization of the time-harmonic response of vibroacoustic devices using cut elements

Dilgen, Sumer B. ; Jensen, Jakob S. ; Aage, Niels
in: Finite Elements in Analysis and Design, vol: 196

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1016/j.finel.2021.103608

Three‐dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints

Silva, Gustavo Assis ; Aage, Niels ; Beck, André Teófilo ; Sigmund, Ole
in: International Journal for Numerical Methods in Engineering, vol: 122, issue: 2, pages: 548-578

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1002/nme.6548

Topology optimization and 3D printing of large deformation compliant mechanisms for straining biological tissues

Kumar, P. ; Schmidleithner, C. ; Larsen, N. B. ; Sigmund, O.
in: Structural and Multidisciplinary Optimization, vol: 63, issue: 3, pages: 1351-1366

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-020-02764-4

Topology Optimization of Large-Scale 3D Morphing Wing Structures

Jensen, Peter Dørffler Ladegaard ; Wang, Fengwen ; Dimino, Ignazio ; Sigmund, Ole
in: Actuators, vol: 10, issue: 9

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.3390/act10090217

Topology optimization of microvascular composites for active-cooling applications using a geometrical reduced-order model

Pejman, Reza ; Sigmund, Ole ; Najafi, Ahmad Raeisi
in: Structural and Multidisciplinary Optimization, vol: 64, pages: 563–583

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1007/s00158-021-02951-x

Topology optimization of structures in transient impacts with Coulomb friction

Kristiansen, Hansotto ; Poulios, Konstantinos ; Aage, Niels
in: International Journal for Numerical Methods in Engineering, vol: 122, pages: 5053-5075

Type: Journal article (Peer reviewed)

Status: Published | Year: 2021 | DOI: https://doi.org/10.1002/nme.6756